|
Physical characteristic
|
|
Dimensions(W x H x D)(mm)
|
140×80×62
|
|
Power consume
|
7W
|
|
Memory
|
|
Program memory size
|
20K |
|
Data memory
|
20K
|
|
Back up (by Flash, no need battery)
|
keep over 10 years
|
|
I/O
|
|
Local digital inputs
|
14 inputs
|
|
Local digital outputs
|
10 outputs
|
|
Local Analog inputs
|
2 inputs
|
|
Local Analog outputs
|
1 outputs
|
|
Digital I/O image size
|
256(128 inputs/128 outputs)
|
|
Analog I/O image size
|
64(32 inputs/32 outputs)
|
|
expansion modules allowed (Max)
|
7 modules
|
|
General
|
|
Timer
|
Total number：256（1ms:4；10ms:16；100ms:236）
|
|
Counters
|
256
|
|
Internal memory bits stored on power down
|
256
|
|
Time interrupts
|
2 with1ms resolution
|
|
Edge interrupts
|
4 up and/or 4 down
|
|
Analog adjustment
|
2 with 8 bit resolution
|
|
Time Clock
|
Built-in
|
|
Real Time Clock
|
Run time after power down 100 hours / typical (40 hours at least 70 hours)
|
|
Card options
|
Memory card, battery card
|
|
Power down hold
|
support;，power down data permanently maintained
|
|
Integrated Communication function
|
|
Ports
|
2 RS-485 standard PPI port ，support Free/Modbus Communication
|
|
PPI Baud Rates
|
PPI：9.6，19.2 and 187.5 Kbps
|
|
Freeport Baud Rates
|
1.2 to 115.2Kbps
|
|
Max. cable length per segment
|
With isolated repeater：1000 m up to 187.5kbaud, 1200m up to 38.4kbaud ，Without isolated repeater: 50 m
|
|
Max. number of stations
|
32 per segment, 126 per network
|
|
Max. number of masters
|
32
|
|
Peer to peer（PPI Master Mode）
|
Yes
|
|
Power
|
|
Input voltage
|
20.4 to 28.8 VDC
|
|
Inrush current
|
12A at 28.8 VDC
|
|
Isolation(field to logic)
|
Not isolated
|
|
Hold up time（loss of power）
|
10ms at 24 VDC
|
|
Sensor voltage、current
|
Voltage：L+ minus 5 V Current：300mA(Max.)
|
|
Current limit
|
1.5A peak，thermal limit non-destructive
|
|
Ripple noise (sensor to logic)
|
Derived from input power
|
|
Isolation (sensor to logic)
|
Not isolated
|
|
CPU Digital Input Specifications
|
|
Built-in digital input
|
14
|
|
Input type
|
PNP/NPN
|
|
Rated voltage
|
24 VDC at 4mA
|
|
Max. continuous permissible voltage
|
30 VDC
|
|
Surge voltage
|
35 VDC for 0.5s
|
|
Logic “1” Min.
|
15 VDC 2.5mA(I0.0~I0.2 and I0.6~I1.5)
4 VDC 8mA(I0.3~I0.5)
|
|
Logic “0” Max.
|
5 VDC 1mA(I0.0~I0.2 and I0.6~I1.5)
1VDC 1mA(I0.3~I0.5)
|
|
Input delay
|
Selectable (0.2 to12.8ms)
|
|
Connection of 2-wire proximity sensor (Bero)
Premissible leakage current (Max.)
|
1mA
|
|
Isolation (field to logic)
|
Yes
|
|
Optical galvanic
|
500 VAC for 1minute
|
|
High-speed counters
|
Single-phase 30K(4pcs) 200K(2pcs)
Double phase 20K(3pcs） 100K(1pcs)
I0.3~I0.5 is high speed input point 200KHz
I0.0~I0.2 and I0.6~I1.5 is high speed input point 30KHz
|
|
Cable length Max.
|
|
|
Shielded
|
500m normal inputs, 50m HSC inputs
|
|
unshielded
|
300m normal inputs
|
|
CPU Digital Output Specifications
|
|
Built-in outputs
|
10
|
|
Output type
|
Solid State-MOSFET(Sourcing)
|
|
Rated voltage
|
24 VDC
|
|
Voltage range
|
5 to 28.8 VDC（Q0.0~Q0.4)
20.4 to 28.8VDC（Q0.5~Q1.1）
|
|
Surge current (Max.)
|
8A for 100ms
|
|
Logic “1” (Min)
|
L+ minus 0.4V,at maximum current
|
|
Logic “0” (Max)
|
0.1 VDC with 10KΩ load
|
|
Rated current per point（Max.）
|
0.75A
|
|
Rated current per common（Max）
|
6A
|
|
Leakage current (Max)
|
10µA
|
|
Lamp load (Max)
|
5W
|
|
Inductive clamp voltage
|
L+ minus 48 VDC, 1w dissipation
|
|
On State resistance (contact)
|
0.3Ω Typical（0.6Ω max.）
|
|
Pulse frequency (Max.)
|
100KHz 2pcs (Q0.0 and Q0.1)
|
|
Lifetime mechanical cycles
|
-
|
|
Lifetime contacts
|
-
|
|
Connecting two outputs in parallel
|
Yes, only outputs in same group
|
|
Analog input characteristics
|
|
Local integrated Analog inputs points
|
2
|
|
Analog input type
|
single-ended
|
|
Voltage range
|
±10V |
|
Data word format，full-scale range
|
-32000 to +32000 |
|
DC input impedance
|
＞100KΩ |
|
Max.input voltage
|
30VDC |
|
Resolution
|
11 bits plus 1 sign bit |
|
LSB value
|
4.88mV |
|
Isolation
|
without |
|
Accuracy
|
±2.5% full range（Max.Error 0-55 degree）
±1.0% full range（typical 25 degree）
|
|
Repeatability
|
±0.05% full range |
|
Analog to digital conversion time
|
125ms |
|
Conversion type
|
SAR |
|
Step response
|
Max.250ms |
|
Noise rejection
|
Typical-40dB@50Hz
|
|
Analog Output Characteristics
|
|
Local integrated Analog inputs points
|
1
|
|
Signal range
|
Voltage：0-10V
Current：0-20mA
|
|
Data word format，full-scale range
|
0 to +32000
|
|
Resolution，full range
|
12bits
|
|
LSB valuel
|
Voltage：2.44mV
Current：4.88uA
|
|
Isolation
|
NO
|
|
Accuracy
|
Max.error：voltage output ±2% full range
current output ±3% full range
Typical case：voltage output ±1% full range
current output ±1% full range
|
|
Setting time
|
voltage output ：50us
current output ：100us
|
|
Max.output drive
|
voltage output ≥5000Ω（min.）
current output ≤500Ω（Max.)
|
