X5S-32TD-E0
|
Rated voltage |
DC 24V |
|
Input allowed voltage rage |
DC 20.4～28.8V |
|
Input current |
200mA（仅CPU，24VDC时） |
|
Surge current |
12A，28.8V DC时 |
|
fuse |
2A 60V |
|
Sensor voltage |
L+ -1V |
|
24V power supply（Max） |
400mA |
|
5V power supply（Max） |
800mA |
|
Isolation（site and logic） |
Non-isolation |
|
Stock specifications |
|
|
Stock memory |
128K |
|
Data memory |
≥80K |
|
External stock |
CPU do not support TF card，expansion by BD |
|
Ordinary Specifications |
|
|
Timer total No.s |
Total 512 PCS，260 PCS 1ms, 46 PCS10ms, 206 PCS100ms |
|
Counter |
256 PCS (include high speed counter） |
|
timer interrupt |
Three 1 ms resolutions (recommended for use over 10 ms) |
|
Counter interrupt |
6 interrupt numbers |
|
Edge interrupt |
8 rising edges or 8 falling edges |
|
Analog potentiometer |
None |
|
Real time clock |
yes |
|
Card lot options |
None |
|
Power down hold |
yes |
|
Digital Input Specifications |
|
|
Digital input build in |
16 points fixed |
|
Input type |
PNP/NPN |
|
Rated Voltage |
24VDC，4mA |
|
Max allowed constant Voltage |
30V DC |
|
Surge Voltage |
35VDC，0.5S |
|
Logic1 (Mini) |
Ordinary：when 15VDC，more than 2.5mA；high speed：when15VDC，more than 4mA |
|
Logic0 (Max) |
Ordinary：when 5VD，less than1mA；high speed：when 5VDC，les than1.6mA |
|
Allowed leakage current(Max) |
1mA |
|
Isolation |
Yes |
|
Photoelectric isolation |
500VAC 1min |
|
High speed counter input rate |
Single phase 200KHz(4个)；AB Phase 100KHz(4PCS，include 1个5V difference ),Support 4x count |
|
Digital Output Specifications |
|
|
Digital output build in |
16 0 (NPN) |
|
Output type |
solid-MOSFET |
|
Rated Voltage |
24VDC |
|
Voltage range |
20.4～28.8VDC |
|
Surge Current（Max） |
8A，100ms |
|
Logic1（Mini） |
20VDC(at maximum current) |
|
Logic0（Max） |
0.1VDC，10 KΩ load |
|
Rated Current per point（Max） |
0.5A （Reuse design 0.2A） |
|
Rate Current per common terminal（Max） |
6A |
|
Leakage current[Max] |
10uA |
|
Lamp load[Max] |
5W |
|
Inductive insertion voltage |
None |
|
Connecting resistance |
0.3 Ω typical value (maximum 0.6 Ω) |
|
Pulse frequency [maximum] |
4 channels：200KHz(Y0,Y1,Y2,Y3) |
|
Environmental relative humidity |
5～95%，No condensation (RH class 2, according to iec60068-2) |
|
Protection level |
IP20 |
|
electromagnetic compatibility |
Noise suppression, in accordance with iec61000-6-2 |
|
Mechanical grade (vibration) |
Comply with iec61131-2 |
|
Grounding |
DGrounding (grounding resistance: below 100 Ω) is not allowed to be grounded together with strong current system |
|
Working environment |
No corrosive, combustible gas, conductive dust (dust) is not serious place |
|
Working height |
Below 2000m (can't be used under the pressure above atmospheric pressure). Otherwise, there is a possibility of failure.) |
WIRING DIAGRAM
