SB DT04

Model No.

SB DT04

Order No.

UN 288-5DT04-0AA0

Side View

model	SB DT04
order number	UN 288-5DT04-0AA0
conventional
Dimensions W x H x D (mm)	35 x 52.2 x 16
weight	18.1 g
power consumption	1.0W
Current Consumption (SM Bus)	50 mA
Current consumption (24 V DC)	4 mA per point input used
digital input
Enter points	2
type	Sink (IEC Type 1 Sink)
Rated voltage	24 V DC at 4 mA, nominal
Allowable continuous voltage	30 V DC max.
surge voltage	35 V DC for 0.5 s
Logic 1 signal (minimum)	15V DC at 2.5mA
Logic 0 signal (maximum)	5V DC at 1mA
Isolation (field side and logic side)	500 V AC for 1 min
isolation group	1
filter time	0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8 µs individually selectable per channel 0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8 ms
Simultaneously connected inputs	2
cable length	500 m (shielded), 300 m (unshielded)
digital output
output points	2
output type	Solid State - MOSFET (Source)
voltage range	20.4 ~ 28.8 V DC
Logic 1 signal at maximum current	20 V DC minimum
Logic 0 signal at maximum current	0.1 V DC max.
Rated current per point (maximum)	0.5 A
lamp load	5W
On-state contact resistance	0.6Ω max.
Leakage current per point	10 μA max
Inrush current	5 A for a maximum duration of 100 ms
overload protection	none
Isolation (field side and logic side)	500 V AC for 1 min
isolation group	1
current per common	1 A
Inductor Clamp Voltage	L + - 48 V, 1 W loss
switch delay	Off-to-on max. 2 μs On-off max. 10 μs
Output status in STOP mode	previous value or replacement value (default is 0)
Simultaneously connected outputs	2
Cable length (maximum)	500 m (shielded), 150 m (unshielded)