model
Technical Parameters
EM DR32
order number
UN 288-2DR32-0AA0
Dimensions W x H x D (mm)
70 x 100 x 81
weight
295.4 g
Power consumption
10 W.
Current consumption (SM bus)
180 mA
Current consumption (24 V DC)
4 mA per input used
11 mA per relay coil used
digital input
Enter the number of points
16
type
sink/source
Rated voltage
24 V DC at 4 mA, nominal
allowable continuous voltage
30 V DC max
surge voltage
35 V DC for 0.5 s
Logic 1 signal (minimum)
15 V DC
Logic 0 signal (maximum)
5 V DC
Isolation (field side vs logic side)
500 V AC for 1 min
isolation group
2
Number of inputs switched on at the same time
16
cable length
500 m (shielded), 150 m (unshielded)
digital output
output points
16
type
relay, dry contact
voltage range
5 ~ 30 V DC or 5 ~ 250 V AC
Logic 1 signal at maximum current
-
Logic 0 signal with 10 KΩ load
-
Rated current per point (max)
2 A
lamp load
30 W DC/200 W AC
On-state electric shock resistance
0.2 Ω max for new devices
Leakage current per point
-
Inrush current
7 A when the contacts are closed
Overload protection
none
Isolation (field side vs logic side)
1500 V AC for 1 min
(coil and contacts)
none (coil and logic side)
Isolation resistance
100 MΩ minimum for new devices
Break the insulation
750 V AC for 1 min
between electric shocks
isolation group
4
Current at each common
8 A
Inductor clamping voltage
-
switch delay
Off to On up to 50 µs
On to Off up to 200 µs
Mechanical life (no load)
10,000,000 open/close cycles
Electric shock life under rated load
100,000 open/close cycles
Output status in STOP mode
previous value or replacement value (default is 0)
Number of outputs switched on at the same time
16
cable length
500 m (shielded), 150 m (unshielded)
Side View
Dimensions (mm)
Wiring Diagram
If You Would Like to Contact Support or Make a Purchase Please Fill out the Form
If you have urgent needs, please call our customer service number
Please fill in your information in detail so that our support staff can clearly understand your needs.
