model
Technical Parameters
EM DR16
order number
UN 288-2DR16-0AA0
Dimensions W x H x D (mm)
45 x 100 x 81
weight
201.9g
power consumption
5.5W
Current Consumption (SM Bus)
145 mA
Current consumption (24 V DC)
4 mA per point input used
11 mA per relay coil used
digital input
Enter points
8
type
sink/source
Rated voltage
24 V DC at 4 mA, nominal
Allowable continuous voltage
30 V DC max
surge voltage
35 V DC for 0.5 s
Logic 1 signal (minimum)
15 V DC
Logic 0 signal (maximum)
5 V DC
Isolation (field side and logic side)
500 V AC for 1 min
isolation group
2
Simultaneously connected inputs
8
cable length
500 m (shielded), 150 m (unshielded)
digital output
output points
8
type
relay, dry contact
voltage range
5 ~ 30V DC or 5 ~ 250V AC
Logic 1 signal at maximum current
-
Logic 0 signal with 10 KΩ load
-
Rated current per point (maximum)
2A
lamp load
30W DC/200W AC
On-state contact resistance
0.2 Ω max for new devices
Leakage current per point
-
Inrush current
7 A when contacts are closed
overload protection
none
Isolation (field side and logic side)
1500 V AC for 1 min
(coil and contacts)
None (coil and logic side)
isolation resistance
100 MΩ minimum for new devices
Break the insulation between contacts
750 V AC for 1 min
isolation group
isolation group
2
current per common
8A
Inductor Clamp Voltage
-
switch delay
Off-to-on max. 50 µs
On-to-off max. 200 µs
Mechanical life (no load)
10,000,000 open/close cycles
Electric shock life under rated load
100,000 open/close cycles
Output status in STOP mode
previous value or replacement value (default is 0)
Simultaneously connected outputs
8
cable length
500 m (shielded), 150 m (unshielded)
Side View
Dimensions (mm)
Wiring Diagram
If You Would Like to Contact Support or Make a Purchase Please Fill out the Form
If you have urgent needs, please call our customer service number
Please fill in your information in detail so that our support staff can clearly understand your needs.
